 |
||||
 |
 |
|||
|
Robust and aesthetic
best describe Prevost's doors and entrances. They are designed to give buildings
their inviting appeal. Select the entrance which best suits your purposes.
Every one of our systems can accommodate an unlimited number of muntin and
mullion types, resulting in original and exclusive creations. |
||||
|
||||
|
A wide selection of framing systems, extrusions and metal sheet stock are available and can be used to manufacture interior or exterior glass partitions, entrances, storefronts and windows. All accessories required for their fabrication and installation are also available. |
||||
 |
||||
 |
||||
| • 25 tubular framing | ||||
|
||||
| The tubular sections of 45 x 102 mm of this series are provided with a centered 13 mm glazing fin. Glazing stops are screwed and allow the use of a large variety of glazing thickness. This robust and economic framing system is designed mainly for interior use. | ||||
 |
||||
| • 30 tubular framing | ||||
|
||||
| The tubular sections of 45 x 102 mm of this series are provided with a 19 mm offset glazing fin. Glazing stops are screwed and allow the use of a large variety of glazing thickness. These robust and economic framings can be used inside and outside. | ||||
|
|
||||
| • 40 thermal barrier framing | ||||
|
||||
| Of a nominal size of 45 mm x 114 mm, this framing system is composed of two extrusions assembled with a thermal barrier. This framing is well suited for entrances of average size with 45 mm or 50 mm thick doors. The insulated glazing is installed using snap in glazing stops. | ||||
|
|
||||
| • 65 modular flush glazing system | ||||
|
||||
| The extrusions of this series are designed for applications requiring fine sight lines at moderate price. With nominal dimensions of 45 mm x 114 mm the system is equipped with a rabbet glazing pocket. The glazing of 5 mm, 6 mm or 10 mm is done using rolled in gaskets inserted into the perimeter of the rabbet pocket giving a flush sight line. This system allows the use of 45 mm or 50 mm thick doors. | ||||
|
|
||||
| • 3600 light curtain wall | ||||
|
||||
| The entrances of the 3600 series combine the performance of a curtain wall while preserving a sharp price. The mullions have a 45 mm face and are available in various depths according to the necessary height and load. Their design allows the use of different interior and exterior finishes. The insulated glazing is installed from outside leaving fine sight lines. This system allows the use of 45 mm or 50 mm thick doors. | ||||
|
|
||||
| Back to home page | ||||
